IAction6

This interface gives access to actions that can be performed on an object.

	Properties
	Code	Returns or sets the action that was performed on an item.
	Param	Returns or sets the item to show or hide.

 

When called from the Action property of an object, from IProjectTree6. GetActivationCode, or from ISGWorld6.OnProjectTreeAction, IAction6 represents the operation that takes place when the object is clicked in the Project Tree.

The following are possible values:

§   AC_FLYTO = 0
Fly to the object operation was started.

§   AC_CIRCLEPATTERN = 1
Circle object operation was started.

§   AC_OVALPATTERN = 2
Oval pattern around the object operation was started.

§   AC_LINEPATTERN = 3
Line pattern around the object operation was started.

§   AC_ARCPATTERN = 4
Arc pattern around the object operation was started.

§   AC_FOLLOWBEHIND = 5
Follow behind the object operation was started.

§   AC_FOLLOWABOVE = 6
Follow above the object operation was started.

§   AC_FOLLOWBELOW = 7
Follow below the object operation was started.

§   AC_FOLLOWRIGHT = 8
Follow from the right of the object operation was started.

§   AC_FOLLOWLEFT = 9
Follow from the left of the object operation was started.

§   AC_FOLLOWBEHINDANDABOVE = 10
Follow from behind and above the object operation was started.

§   AC_FOLLOWCOCKPIT = 11
Follow from cockpit operation was started.

§   AC_FOLLOWFROMGROUND = 12
Follow the object from the ground point operation was started.

§   AC_JUMP = 14
Jump to the object operation was started.

When IAction6 is called from SGWorld6.OnObjectAction, IAction6 represents the action performed on a TerraExplorer object.

The following values are valid:

·         AC_FLYTO = 0
Fly to the object operation was started.

·         AC_CIRCLEPATTERN = 1
Circle object operation was started.

·         AC_OVALPATTERN = 2
Oval pattern around the object operation was started.

·         AC_LINEPATTERN = 3
Line pattern around the object operation was started.

·         AC_ARCPATTERN = 4
Arc pattern around the object operation was started.

·         AC_FOLLOWBEHIND = 5
Follow behind the object operation was started.

·         AC_FOLLOWABOVE = 6
Follow above the object operation was started.

·         AC_FOLLOWBELOW = 7
Follow below the object operation was started.

·         AC_FOLLOWRIGHT = 8
Follow from the right of the object operation was started.

·         AC_FOLLOWLEFT = 9
Follow from the left of the object operation was started.

·         AC_FOLLOWBEHINDANDABOVE = 10
Follow from behind and above the object operation was started.

·         AC_FOLLOWCOCKPIT = 11
Follow from cockpit operation was started.

·         AC_FOLLOWFROMGROUND = 12
Follow the object from the ground point operation was started.

·         AC_STOP = 13
The object was stopped being played (i.e., after a fly to operation).

·         AC_JUMP = 14
Jump to the object operation was started.

·         AC_DELETE = 15
The object was deleted.

·         AC_EDIT_FINISHED = 16
The object was finished being edited.

·         AC_OBJECT_ADDED = 17
An object was added to TerraExplorer.

·         AC_PLAY = 18
Play operation for the object was started.

·         AC_SHOW = 19
A show or hide action was performed by clicking on the item show/hide icon.

·         AC_EDIT_STARTED = 20
Edit operation for the object was started.

·         AC_SELCHANGED = 21
The current selected item(s) has changed.

·         AC_WAYPOINT_REACHED = 22
A dynamic object reached a way point, or the camera reached a route waypoint.

·         AC_GROUP_ADDED = 23
A group was added .

·         AC_LAYER_ADDED = 24
A layer was added .

·         AC_LAYER_REFRESHED = 25
A layer was refreshed.

·         AC_ITEM_MOVED = 26
An item was moved to a different location.